Project Fredybender V2.1 : NA with an attitude for the track by fredybender

2 minute(s) of a 234 minute read

I haven't worked on the car, as much as I wanted to, but thats how it goes...

Working on modifying the heim joint lower control arms: shockwav3 is a great stand up guy, he made some more parts and shipped them out; I really would like to point out his dedication on the control arms. Yes there were issues, but he stood up and worked with me to correct that.

So I will have a FULL spherical rod end set-up, including top plate, lower control arms, & tie-rods 

working on finishing the rear disc set up, with the Wilwood prop valve.

I will be working on the ball joint extenders, with modified & welded spindles, not bolt on parts.

I'm still waiting on my shifter from Germany, which will defiantly be porn 

I also started to machine some steering column bearing repair parts, posted some up for sale, but the tex brought them down. Just thought I would share what they look like and if you think this is good for you PM me, do not post about them in the thread...

Its a bearing retainer that just blots on to the steering column, no need to take it apart.

It holds the lower bearing in place, as the plastic race usually breaks & slips out.