You must be logged in to rate content!
3 minute read
1. Tilt the arm rest so it's vertical and exposing the bottom plastic plate.
2. Grab the base of the plate and pull outwards. Top side swings out, but base and sides are simply clips.
3. Remove plastic plate and look for 2 torx-25 screw.
4. Unscrew the two screws and push/pull the arm rest cover down and up and it will slide off.
5. Remove the arm rest from assembly.
6. On back side of arm rest cover, you'll find a series of staples holding the upholstery to the arm rest.
7. Remove the staples and peel back the OEM cloth cover and remove foam insert.
8. Wrap RedlineGoods custom cover over existing plastic armrest assembly and slap leather to smooth out cover.
CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.
