- Alternator
- Hammer
- Ratchets
- 13mm socket
- 10mm socket
- 5mm allen driver
- 14mm wrench
- various extensions
- flathead screwdriver
- a set pin to help with the belt tensioner
You must be logged in to rate content!
1 minute read
This is a fairly easy process, and will take 2 hours maximum if you're a beginner or inexperienced. A more experienced wrench shouldn't take more than an hour from start to finish.
If you haven't done your accessory belt and tensioner, now is good time to do it! You have to remove the belt from around the alternator, and remove the belt tensioner anyway. In this video I cover the removal since you have to, but I do have a dedicated video for the accessory belt and tensioner install.
If you have any questions feel free to leave them on my You Tube channel!
Thanks for sharing!
Posted by diyauto on 10/31/19 @ 1:05:30 PM