You must be logged in to rate content!
2 minute read
1. Remove shift knob.
2. Pop plastic rectangular piece out of console by pushing forward (towards dash) and lifting up at the same time.
3. Remove screws on underside of plastic "rectangle" that hold the boot on the plastic console piece.
4. Remove boot from the console piece.
5. Fit base of the RedlineGoods boot in the rectangular cutout of console plastic piece.
6. Flip over and screw boot piece into the holes in the rectangular cutout with the stock screws.
7. Fit plastic rectangular console piece back into the consol over the shift lever (by fitting the two tabs in the corresponding tab holes and by pushing down).
8. Reinstall shift knob.
ENJOY YOUR NEW LEATHER BOOTS!
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.
