Consolidation of Information: Haldex into Corrado. (02m, Syncro) by JamesS

2 minute(s) of a 87 minute read

7-10-2013

I didn't like how the mk3 subframe rear arms fit, so I made some pieces tonight that should make it look less like it was meant for something else.

Also put in the 02m shifter. I dont mind the height it sits at so I won't be cutting it down. Made me realize I need a new shift knob .

My hope is that next weekend I will be putting the suspension in for good 

7-11-2013

Thanks! I am really impressed with the cable horns, solid bushings and wiper delete I bought from you guys.

That is because you must have the TT box (which is the fist I have actually seen a picture of personally). See how it is low and has that offset? 02j and 02m from MkIV is just a straight long shaft which is waay too tall for the corrado (IMO). ....unless of course you have dinosaur arms 

For the subframe I was originally going to go the washer route just to save time, but locating the position of the holes was too much hassle. This should be much cleaner, and I needed the cup tigged anyway.

That is interesting about the shiftbox, I had no idea the stalks were slightly different, but its worth noting for anyone doing the shifterbox swap as it will put the knob slightly forward