Consolidation of Information: Haldex into Corrado. (02m, Syncro) by JamesS

2 minute(s) of a 87 minute read

12-27-2012

Looks like the transfer case is going to have clearance issues. 

Likely need to source a syncro downpipe... anyone have any insight?

1-10-2013

Have a question if anyone has insight...

First, I am looking at the internal slave cylinder of the 02m and my clutch line from USP. It has one female fitting and one banjo fitting... Im not sure how this is compatible even though it was specified for Corrado to 02m slave. It looks like I need a piece which fits between the 02m male slave and the male line

But, as far as I can see the Corrado master does not use a banjo fitting.

I would look up the part # but my pirated etka has been giving me troubles.

As far as an update I am very happy to get a syncro downpipe! Thanks to Dave for shipping it out to me quickly, really appreciate it.

Blurry pic but shows how it goes around the transfer case.

Thanks for the info. I do have the bango bolt, I wonder whether I can thread that into my master....

The bleeder block is PN 1J0 721 468 C if anyone comes across this in the future.