You must be logged in to rate content!
2 minute read
1. Remove your shift knob by simply unscrewing it counter-clockwise with your hand.
2. Press down on the outer rim of your stock shift boot starting with the front leading edge. It should push right down, you will then be able to slide out the other 3 outer edges from the retaining clips.
3. Remove the wire from the old boot and slide it into the fold at the bottom of the new one. Better yet, take a drycleaner's wire coat hanger, cut it and form it to the same shape the wire from the stock boot has. This way you won't be ruining your stock boot should you ever need it.
4. Remove the top trim piece from the stock boot and mount it to the RedlineGoods.com one. Flip the stock boot inside out and it will become evident on how to do that. :)
5. Insert the right most edge of your new boot into the two retaining clips and slowly work it in following with the top and bottom sides of the shift boot. Lastly, finish snapping in the left most edge into its retaining clips. Screw your shift knob back on.
CONGRATULATIONS! YOU'RE DONE!
