Mk4 toyota supra cummins diesel build

3 minute(s) of a 127 minute read

can get the exhaust gasket from here, does also include a sheet of intake/paper gasket too

www.ebay.co.uk/itm/Exhaust-Gasket-Material-Make-Your-Own-Sheet-Metal-Gasket-Material-250mm-x-300mm-/232414688292?_trksid=p2385738.m4383.l4275.c10


started on some undercarpet sound proofing, 25mm class 0 closed foam for the bulk and 5 +10mm neoprene for leveling undercarpet out and ramming it every spare space to reduce noise

the 25mm there and i did a layer of 5mm ontop that goes to the back and up the tunnel, it does make the carpet quite the handful when putting back in but does alot, left overnight with 40kg of floor dry bags to help it stay glued in place 

6-23-2019

Hit one of those walls again of effort but heres abit of an update, need to start the wiring like 4 weeks ago but i hate it


both front arches are on and trimmed back ready to make the front bumper, also bonnet has been trimmed you might notice the turbo

only abit of poke

made up the alternator brackets, ordered to belts 1 too short and 1 too long so just waiting for a special order belt for that

the face when people say you shouldnt do that, also rock sliders made up, bit of grinding back to be done and tube ends cut

made to make clutch and brake pedals up so using landrover pads and abit of 3mm flat to start with

not too bad, clutch is adjustable left to right