You must be logged in to rate content!
2 minute(s) of a 127 minute read
12-21-2017
popped down to my mates, hand drilling stuff is too hard aye, cnc machine to drill up the towbar ball spacer as its that critical 
wiring ran to the anderson connector, both 35mm cabling
bumper and spoiler on for good can see the tinted lights too, anderson connector will be hidden under the flip up numberplate
with the spacer made up all bolted on together for good, incase anyone is wondering towbar consists of 50x100x5mm box with a 10mm drop plate fully welded and a 60mm ball spacer with 2 extra 5mm twist flanges to the chassis, in total 6 m8(12.9 grade) bolts, 2 M8 nyloc nuts, 1 m10fine bolt and 1 M12 fine bolt holding it to the end of the chassis so i should be able to pull some weight.
Comments
I bet the purists probably don't like this, but screw them! This thing looks like a blast!
Posted by stevegolf on 10/22/20 @ 11:15:40 PM
This thing is insane. Definitely not a swap I would think of doing, but it looks like it will be a blast to drive. I like the mad max look you have going too.
Posted by MPower on 10/1/20 @ 8:26:26 PM
Wow thanks for sharing!
Posted by Diggymart on 9/20/20 @ 2:50:40 PM
This is my kind of build right here. Very nicely done!
Posted by Squonkwerkz Garage on 9/28/21 @ 2:07:53 AM