Going Single after 10 years / SP F1 Manifold, PTE6265 by Josh S

2 minute(s) of a 66 minute read

I had the day off of work today so I spent a bit of time in the garage.  

First I wanted to replace the heater hoses. Using this guide http://www.supraforums.com/forum/sho...gle-conversion I was able to find both hoses at my local Autozone.  

Before:



Hoses Used:



After:



I had to go out and get some bent pliers to get the clamp off between the valve covers. Also for anyone else doing this be careful with the nipples that exit the heater core, they are very soft, I actually crushed one slightly trying to get the hose off it. Luckily I was able to reshape without any issue.  

I also wanted to clean the head below the valve covers. I used Simple Green and a toothbrush to get it clean.

Before:



After: