project ae86 3sgte :) by marley4us

4 minute(s) of a 221 minute read

FINISHED After a clear coat and tinting

9-13-2012

Got some work done, and took some pics.

Mounted the brake ducts, and made brakets and angled the tube so it will help cool the FC brakes.

Then started working on the SR20DET valley cover for the coilpacks, I heard that many people take them off cause the heat can decrease the longevity of the packs, or they buy a vented valley.

So I thought why pay 150 bucks for something I can make for free pretty much. So I started cutting out the center of the cover.

I still need to even it all out.

Then Found Some perforated metal I had laying around.

Cut out some CarbonFiber matt I have, just need to find my resin and hardener so I can lay it on and trim to fit!

9-15-2012

Cleaned up the cuts with my angle grinder

Test fit the mesh

First layer of CF

After it hardened

Trimming it down to size

Hey its starting to look like a valley cover again

Cut out the venter for the vents

all finished, just need to wetsand and polish still, but that will be done later.

9-17-2012

Started work on the stock eyelids, thought it would look nice to match them to the car with some CF accents.