xluben's 2011 WRX: Spec B 6 Speed and Rotated PTE 6266 by xluben

By diyauto
( 4 )

3 minute(s) of a 643 minute read

1-23-2011

I have mine installed with a Defi boost gauge on the right side, and a gauge pod blank on the left.

Actual view (wheel adjusted as I actually use it):



Left Side:



Right Side:



Which one is OEM?



The pod looks excellent. The finish is a near perfect match. Unless you told someone it was a new piece, there's no way they'd notice on their own. Even after being told 99% of people would say it looks identical. The gauge placement is very good. From where I sit the "MPH" is partially blocked on the speedometer, and a little bit of the temp gauge is blocked.  

The blinker/wiper levers do get in the way of the gauge pods a little bit depending on where you have the wheel adjusted to. Moreso on the left side where I have the blank. On the right side the wiper lever blocks a little bit of my boost gauge, but nothing that I need to see. Overall I am 100% happy with the pod, and would recommend it to anyone!


1-29-2011

Walbro 255 fuel pump went in on Thursday. Needed to do the double o-ring trick to get any fuel pressure at all. Took me a while, but everything is in and working well. Little bit louder than stock, but not bad with the rear seat back in place. The only time you can really hear it is when you turn the car on, once you're driving it's not noticeable.

More info on getting the pump to properly seal up can be found here:

http://forums.nasioc.com/forums/show....php?t=2130397


Kartboy Shifter Bushings finally went in today. I've had them for months, but never got around to putting them on. Turns out it is very, very easy on the newer WRX's. Jack up the car on jack stands, remove rear tranny brace, unscrew bolt holding in the stock bushing, pop out the bushing, and then install the new bushings and put it all back together.  

Bolts all came out easily. Rear brace slides out, even with the COBB downpipe in place. And I had absolutely no trouble getting the old bushing out, or the new bushings back in. This install was really a piece of cake. Didn't take me more than 30 minutes. Real quick and easy.  

The difference in shifting feel is incredible. Much more firm and crisp. Notchiness is up a bit, but it feels great. Absolutely no question when you put the car into gear. Seems much easier to shift quickly and accurately. The bushings are a great pair with the MODE short shifter. Both are highly recommended.



Comments