Brandon's 2012 ISM STI Build GR Sedan by evans609

By diyauto
( 3 )

4 minute(s) of a 338 minute read

4-10-2016

Another update today! I love how fast and smooth everything is going on the installs.

So to start;

So first thing was removing the old brakes pads, so here is a shot of the new brake pads (Top) vs old (Bottom)



Close up on the new rear pads



Comparison of the New Pads for front (Top) and Old ones (Bottom)



Close up of the new Front pads



Bonus Sti shot haha



The whole kit and getting ready to install pads. Install is straight forward when it comes to brakes. The one piece calipers are awesome to work with. Just take the caliper off, haul the pins out on the inside part of the caliper and haul out the internals. Make sure to compress the Caliper pistons back in.


4-10-2016

Calliper mounted back up.



Front shot of it done



Rear mounted



A shot of how the galley plug connects to the side of the calliper



and now to bleed the brakes.



New fluid



and brakes are done.


Next was the steering rack bushings. Here is the bushings laid out with the instructions.



Closer shot



Some shots during install




Taking the old bushings out



and the new ones back in



this is the rear diff bracket. a press is used to get this bushings in and out so bringing it to a shop tomorrow to get that done.



Some other things we got done was the headlights are removed, truck liner is out and the centre console is out. Ill be doing some little projects with that this week and will have updates as I go of course.


Comments