JDM Taillight Mod for an 04 STI by static-psi

2 minute read

JDM Taillight Mod for an 04 STI

Compliments of static-psi @ www.nasioc.com

This is a fairly easy modification you can do in 5-10 minutes.

The only tool you'll need is a flathead screwdriver (this may not be necessary if you have fingernails).

To access the taillights, you need to remove clips from your trunk.

There is one clip on the driver side:

There are two clips on the passenger side:

I found the following picture of the taillight:

Instructions:
Take out the three harnesses.

Take the one that was closest to you and move it to the furthest one.

Move the middle one closest to you.

Remove the harness from the furthest, and move it to the middle.

Remove the middle bulb

Replace the clips

Pictures (these are not my car - it's still light out)

Before (no brake):

Before (brake):

After (no brake):

After (brake):

Found DIY @

http://www.clubwrx.net/forums/exteri...od-05-sti.html