You must be logged in to rate content!
2 minute read
The cover is installed on your stock armrest with flat elastic which goes between the two parts your stock armrest comprises. Just open the armrest, remove screws to loosen the top part, pull the armrest on it and screw it back to the bottom part - 5 minutes work in all!
\ For tight fitment, you might want to consider glueing the armrest to the inside of the top part of the armrest cover. Any quick-drying epoxy-based glue will work great along with some clamps.
\ you have the boots glued to the frame just reverse the removal process, and don't forget to re-connect your electrical plugs.
CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.
