And in rolls the SaaBeeru ... by Bradcr

2 minute(s) of a 145 minute read

Now I'm pushing through the last of the soundproofing (actually completed this next step before my retune). First off, I wanted to finish up the sound 'bubble' in the hatch area. I did the tap test and found too much under the spare, and some dynamat was needed. Checking further, I put a panel on the rear plate and several inside the hatch itself:

MLV into the rear hatch and the panel below it:

I took it out for a drive, now exhaust sound is really concentrated in the rear doors, seems like there's nothing directly behind:

Cruising:

Idle: