You must be logged in to rate content!
2 minute read
1. Removing the shift knobs on SC's can be quite difficult. Take a 15 mm or adjustable wrench and place it under the shift knob. Some like to place a cloth or other soft material to prevent damage to the shift knob or lever.
2. Pull off the rubber boot. Install the leather boot over the rubber boot (the rubber will provide the base and structure for the leather boot. You can trim off the top part of the rubber boot, but make sure to keep the bottom (around half of it at least). Reinstall.
3. Same principle applies to ebrake boot, remove the rubber one.
4. Install the leather boot instead of the rubber boot.
CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.
