You must be logged in to rate content!
6 minute(s) of a 148 minute read
11-25-2010
1969 GTO Judge Clone LQ4 turbo 4L60e
Compliments of 2165 Turbo Rail @ www.ls1tech.com
we started this a couple weeks ago so I guess its time to start posting some pics and info about it. This is my dad's car
its a Judge clone that someone built 10-12 years ago. It had a 400 with a turbo 350 and a 7.5 rear end with 2.73 gears
we are putting a LQ4 motor with a T76 turbo in it (coping my friends wagon, 94LS1Bird, the green 1960 Parkwood wagon)
I'm using the COMP CAMS PART NUMBER #54-480-11
COMP CAMS 5/16" HI-TECH PUSHRODS 7.400" LENGTH #7955-16
Patriot Gold springs
Yank SS3200 converter
custom built 3" log manifold on the pass side and a stock f-body manifold on the drivers side with a 2.5" pipe connecting the two
for now I'm going to put in a 10 bolt with 3.32 Posi now has a built 9" with 3.50 and true trac
F-body Oil pan
Walbro 255 fuel pump now has Bosch 044
Aeromotive 100 micron prefilter
stock filter/regulator from an 02 vette
solid motor mounts
here are some pics
11/27/2010
we used a buddies mock up foam block and tranny (the only want to go)
had to make sure the AC would work in its stock location
getting the intercooler in place
welded in a bar to bolt the bottom of the inter cooler to
ignore the core support not being bolted to the frame. its since been fixed
new dual pass radiator
in with acc on and log tacked together
condenser mounted between the inter cooler and radiator
Windstar van fans
did a little trimming on the fans
had to cut the floor a little to get everything lined up the way we wanted
my 5 day old daughter helping out by holding the 100 micron prefilter
Muscle ????
Posted by Diggymart on 10/2/19 @ 2:15:08 PM