You must be logged in to rate content!
2 minute read
02-04 PONTIAC GTO AUTOMATIC TRANSMISSION
INSTALLATION INSTRUCTIONS
1. The first steps are the same as in the manual install guide for the GTO. The boot and surround are attached differently. Also the shift knob has a different shape at the bottom which you can see in photo 2.
Find it here.
2. The bolt to remove to remove the shift knob:
3. Remove the retainers (4) one at each corner which attaches the shift plate to the shifter.
4. Here is the backside of the shift plate with the redline boot attached - I used glue because the holes were slighty larger, just put drops of glue over the mounting prongs, after sliding the new boot on them of course! :)
5. Reinstall everything in the reverse order of removal.
CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.