You must be logged in to rate content!
4 minute(s) of a 92 minute read
11-22-2013
They are oil cooled. I have a feed block from right above the oil filter. http://www.sq-creati...cncoilblock.jpg
Got another update:
The first picture is of the new mount to support the air to water intercooler. Next is the inlet side piping being fitted. Then the throttle body side being fitted. Finally on this round is the bov pipe being mocked up.
Now its time to work on the hot side pipes feeding the turbos. First up is the drivers side pipe. I got started on the passengers side but didn't get finished on this round. (Nov. 2013)
11-26-2013
Got an exciting update this round. The passenger pipe feeding the turbo is in place. Now its time to build the twin 3 inch exhaust that merges into a 4 inch magnaflow muffler. The Driver side pipe is feed into a 3 to 4 inch transition cone before it makes the roller coaster turn. Then the passenger side gets merged right before the muffler. Finally for this round are the wastegates getting positioned. Had a little hiccup on this round though. One of the casters on my harbor freight welding cart came apart while being repositioned and everything almost toppled over. I caught it and now have new casters on the cart. (Nov. 2013)
