You must be logged in to rate content!
2 minute read
04-10 ARMADA ARM REST INSTALLATION INSTRUCTIONS
1. Slip the cover over the insert, being sure that the round hole in the cover matches up to the circular plate on the insert.
2. Leave the small hole on the opposite side of the circular plate exposed to be able to screw the bolt into the side of the seat.
3. Securely screw in the bolt using a 12mm wrench with extension, and being sure that the alignment post on the circular plate inserts into the corresponding hole in the seat plate.
4. Slip the cover over the exposed side of the insert and fasten with Velcro closure.
CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.