You must be logged in to rate content!
3 minute read
Door Handle Replacement DIY
Compliments of loungn14 @ mbworld.org
11-19-2010
Hey guys, I had to replace the door handle as the lock button didnt work anymore. Figured i would do a diy for others that might have this issue.
Here is the replacement piece
Open the door, and remove the inside weatherstrip at this location
You will then see a screw hole. Take a torx wrench and loosen the screw.
You can then gently remove the lock assembly
I personally didn't know if the screw would fall into the door so I actually taped the torx to the door temp while maintaining forward pressure
Gently slide the handle toward the back of the car and It will pop out
Using needle nose plyers remove the sensor
Slide the new one in making sure that the rubber gaskets are seated properly and the "L" piece of the handle fits behind this gold piece in the door
Push the lock back in and screw it back down
Test and all should be well! One of the things you can actually replace without having to code the darn thing using Star! Really simple to do!