e430 Endurance Racecar build by WOT-Tech

By diyauto
( 4 )

2 minute(s) of a 17 minute read

3-10-2016


3-11-2016


Test fit some junk yard scored today. The front bumper actually was sold at the same yard and had paint pen markings on it from 2014 lol.





3-18-2016

In case anyone needs one, "Jags That Run" sell an adapter flange for the MB diffs that allow a domestic Dana yoke to bolt up. This makes the drive shaft a simple lengthened from an F-Body.

Got the Quaife today and the 3.07 should be here by days end as well. Local drive shaft company is making the drive shaft.

Shifter has been modified with a steeper angle to be comfortable with the driver.

This thing should be moving under it's own power soon


3-26-2016

Started with cardboard for a template, transferred that to Lexan so it's see through in case any holes have to be moved. After 2 Lexan prototypes, we are ready to reproduce in steel. These are 4 30mm piston calipers with twice the pad surface and we upgraded from the e430 solid to e430 4Matic rear vented rotors in the process. 






Comments

Interesting build

Posted by Diggymart on 4/11/20 @ 12:27:26 PM