You must be logged in to rate content!
4 minute(s) of a 196 minute read
3-15-2014
This Friday I was down in Woodbridge so I stopped into Malloy and picked up the new wheel bearings for the front & rear. The fronts actually come as a spindle with the bearing pre-installed. These pressed out much easier than the bushings did. The rear requires that you press the spindle out first before you can get the bearing out. Still pretty simple either way. I cleaned all the parts really well and went after them with a wire wheel. Then I painted everything with high temp caliper paint out of a spray can. Everything turned out pretty well, Only need to reassemble the parts at this point.
Going to get some new rotors, lines and pads to wrap up the brakes though before I slap it all back together.
New bearings
Rears off the car
The basic set up for rears
Separated
Wire wheeled off the barnacles growing on the aluminum
Then painted...
The fronts cleaned up just as well.
Degreased & touched up with fresh coat on the subframe
Then jumped on the calipers, got one knocked out. Finish this off later...
Wrapped the day up with a trip from the Fed Ex man.
I read that Sake Bomb Garage is going through finding a new lease to operate out of so I jumped on it and ordered some premiums, and a door handle since they might be out of commission for a while.
My initial impression of SBG is a good one, customer service was very good. Heath is very personable and the parts look really striking. Nice quality manufacturing from outward appearances. Obviously I won't know how nice these lights are anytime this month.
3-20-2014
I am chipping away at this slowly. I pulled everything out the night before last and started to put the rear end back in. I have to dig through the zip lock bags in the bins to find the bolts. I wiped the dust off the car and that was about it.
I am ordering a stop tech basic brake kit today, with rotors, lines and pads. I also bought a PFS SMIC with intake and a set of 99 spec twins out of the classifieds this past week.
So this weekend I will be remounting all of the suspension parts and then re-working the steering rack. I bought new tie rod ends and new boots for it.
A few pics for Thursday morning.
A family affair..love it! Thanks for sharing!
Posted by Diggymart on 1/16/19 @ 10:19:30 PM