You must be logged in to rate content!
8 minute(s) of a 569 minute read
11-9-2010
LOL! Next year, Wal-Mart old/fat/lazy people scooter for me.
This is going to me me next year at SEMA..
Yes, I'm going to be that lazy and even use it to goto Vegas Buffet with it
Engine bay pic from tonight..
11-12-2010
My interior pic - with updated PFC commander and few little stuff. By the way, now I can see the commander during the day!
John, I'm sorry.. but at least you know I'm getting good use out of that RE-A speedo.
My next plan when I get off my *** is to install this RE-A speedo to the matching green lid to more rare cluster... Mazda RE 30th Anniversary Cluster..
I'm not looking forward to taking the cluster out...
11-13-2010
Sometimes, this is what I do..
Just stand in front of the car staring at it and think about things I need to do.... or polish stuff for no good reason because it relaxes me...
12-11-2010
Are you sure about this??
I thought these lit up green... as I've seen it before purchasing..
12-19-2010
Update...
I haven't driven the Cosmo in awhile so I picked it up few days ago, detailed the car, swapped out the wheels, and drove around town and snapped some pics.
12-29-2010
Today, I got my FEED stuff from Jonathan @ www.GorillaRE.com
1-2-2011
Gordon, PM replied.
Well, I had some time today and messed around with my CF hatch and APR GT300 wing.
Here are some pics.
CF hatch with FAL lexan
APR GT300 CF wing
Testing
Mounted on the hatch.
1-8-2011
Hi David,
What I used was a press like this
and I actually had Mazda bearing tools that match the size of the bushing that I used to press them out (I bought out all Mazda Dealership specialty tools... 800+lbs of it). But you could also use different size sockets that matches the size to push them out.
yeah.. I have the delrins. They do squeak... but at this point, my whole entire car squeaks. I've heard good things about SuprPro bushings but I don't have a first hand experience.
Also, where are you getting the MS bushings? MazdaComp?
dlarson101, I'm running Ichiba V2 but I recently ordered some FIC 10mms. They are all hub centric, bolts on, and studs out from the spacers. These tends to be bit better and safer than running longer studs. But I prefer not to use spacers if I don't have to (Just using them for my baller wheels )
1-9-2011
David,
I don't know if Ray can order them... and also not sure if Mazdacomp still carries these (as I've heard almost all mazdaspeed goodies are discontinued).
Anyhow, here is the info I have from old Mazdacomp catalog. Hope this helps... I also have the catalog number from Japanese MS catalog.
Front
Rear
Also, FYI... Last week I had a chance to drive a stock suspension 93 VR touring in mint condition with less than 23K miles... And I have to say, that car drove fantastic on the road. I guess I also never realized how nice touring FDs were and how fun stock FD's can be. That being said, I think if you can't find MS ones, I would replace them with OEM.
1-13-2011
Got another FEED goodies.. one day I'll put this on just to say I have most of FEED goodies
1-14-2011
From Brian's site (www.rx7boutique.com)..
Its very similar to Mazdaspeed version (I wouldn't be surprised if KS made it for Mazda). Brian, if you are reading this and you do run across the MS DP, let me know
MS version..
Gordon, my stuffs are nothing compare to what you've done to your car.. All my junk are just bolt ons... One day though... I would like to get some nice custom works done like yours.
Anyhow, more FEED junk I've gotten.. and need to install (maybe this weekend)..
FEED Coilovers
FEED Fender Brace
And FEED brake reservoir cap