You must be logged in to rate content!
7 minute(s) of a 569 minute read
6-27-2010
Put the APR mirrors on the car...
6-30-2010
I should post about my thoughts on these mirrors..
Quality I give 7.5 out of 10. Functionality and Visibility, I give 6 out of 10. Install, I give 9 out of 10.. except adjusting them 3 out of 10. Its quite difficult to adjust as I have to get out of the car and such. Also, once its tighten down, its quite hard to move them and when you tighten them down, you could move the adjusted mirror and have to re adjust.
The driver's side mirror where initially would move with one finger after tightening it down. After examining the mirror, found out that the top bolt on the mirror housing was bit too long. Because of it, it wasnt going to hold the mirror in place. I had to grind down about 1/8 inch and helped out quite a bit. But overall, Not sure how well its going to hold up in a long run. But for me I bought this thing to try it out and see how it looks. Also, it will be garaged and not left outside.
i might still go back to stock or with Ganador mirrors in the long run..
7-1-2010
Shoot...
I just searched through the DGRRX pictures and realized about Papsmagu's craftsquare mirrors..
Damn, those are pretty nice! I wished I had realized it when I was up there 
here are few pics I've found of his mirrors/car..
7-3-2010
It was a beautiful day today and took the car out to meet up with some classic car guys for donut and coffee... Afterwards, I took some updated pics with the new mirrors.. I actually like this mirror a LOT!! I thought it would be bit too small for the car but I think its just a right size.
Issues... At about 110MPH, I could see the mirror started to vibrate. I've tighten down the driver side but it vibrated bit more than my liking... I'm going to try to figure some way to tighten down the mirror bit more.
And my interior with Prosport gauges and their center speaker pod.
7-4-2010
Thanks David for that pic. That really shows how the mirrors look.
Simon, You car is Awesome!! One of my favorite FD's!
That being said, I have few more pics from yesterday 
And My interior shot from the back of the car.. Its little dirty back there 
Thanks Everyone for the kind words..
Here are couple of more 
7-18-2010
Picture of my car from this weekend... at Import Alliance meet in Nashville.
I didn't take this pic... but I like it as the car shines really nice 
7-21-2010
Thanks for the kind words guys..
I'll be doing few more things to the MB but I need to also work on my SSM. I'm going to put my recent add on and take some pics over the weekend.... hopefully some of you guys will appreciate the new look.
Anyhow, Here is another pic of the MB FD from IA 2010.
7-22-2010
After waiting, I finally got something for the SSM FD 
7-23-2010
I am trying to get the car to look very similar to this B-Spec RX7... with some rare Mazda/Mazdaspeed parts inside and out... I'm getting pretty close to getting all the parts I need.. Now just getting off my *** and put some of these parts in... including some unique stuff in the engine bay (I'll post details to it later... but I been planning it for about 6 months) which will also include all mazda stuff 
7-27-2010
Thanks John!! I didn't know I made it on there 
Also, here are some pro took of mine on flicker.. They are pretty bad ***!!
I really want the rolling shot!!