94 Build... GT35R, RE Vmount and a whole lot more............ NOW WITH PISTONS!! by XLR8

By diyauto
( 5 )

3 minute(s) of a 390 minute read

8-3-2013

8-3-2013


Heat Management


I finished up the shielding and sleeving. I feel that it turned out pretty good. The downpipe cover took some massaging but I got it fitted. I sleeved the HPS silicone coolant line, as well as the OEM hose coming from the heater core. 







8-9-2013


One possibility for the intake pipe and filter. The Mazdaspeed hood actually gives me a little more top clearance. I have another bigger filter that I may try to fit. I also have a few different pipes, as well as a 90/22 "S" bend pipe. I will see what kind of room I have once the vmount is installed. With most larger core vmounts, there isn't a lot of room for "cold air" intake. I personally think it doesn't matters much with a turbo setup as the compressed air gets heated instantly. I'll be spraying plenty of meth in there to get things cool regardless. 






8-10-2013


And now with the nozzle mounted....


I do want to thank M-W-I Systems for sending me the nozzle mount. I saw it in their kit and contacted them. They were happy to help me out and were very generous. Thanks guys.


http://www.mechanical-water-injection.com/


I plan to contact K&N on having a custom filter made. They have a black synthetic oil-free material that will match my engine bay scheme perfectly. They just don't make very many sizes. Their custom shop will be able to make the same one I have now in that material. What can I say... I like things to match. 








Comments