1977 Towncar Resto mod! by sauceman

3 minute(s) of a 216 minute read

6-23-2014

That's what I've been using so far for the exhaust manifolds and such, I really like the product.

The issue with trying to paint the diff bare steel is all the dimples from rust, I don't think it would look right unless I filled in all the dimples.

Differential going in.

Action shot.

Rock Auto sent the wrong mounts, have to send them back.

Won't even fit the frame

6-24-2014

Yes Mike, anytime just shoot me a PM whenever you want to come down. Also if your driving by and the garage doors are open it means I'm home  

Todays installment;

Had to use a ratchet strap to squeeze the rear coils to bolt up the shocks :)

All buttoned up, will do the final torqueing after all the weight is on the ground.

Picked up my parts from the powdercoater!

The new control arm bushings did not quite fit on the crossbar, press to the rescue!

I had thrown out all the old inner bushings except one, thankfully because I used it to press on the new inner sleeves.

until next time!