Coffin car build

2 minute(s) of a 43 minute read

did some more fine tuning moved the dist. back one tooth and took the little return springs off the dump carbs, to much tension on the cable i couldnt figure out what was causing this helps if you read the instructions that come with the kit first.:-)

well i tryed the SP1 clear goes on smooth i put on 3 coats ill do 3 more tomorrow looks like glass also didnt want to waste any so i used some on the frame rails and front end axle tri rod and spring since its black looks great now I have to the chrome trim around the driver opening did a test fit looks nice and covers up the edge

5-15-2012

wet sanded yesterday just the sides and lid can't really sand all the little detail on the trim. coming out very nice i think i like this clear. also before i started i wanted to test fit. got in the seat closed the lid dam its tight sure glad i dont have to drive this far . started it up, backed out bout 20 ft and drove it back in and my left leg got a charlie horse..... ouch probably the way i was in there

5-19-2012

attened first car show of the season, got there an hr late....and won best kustom car award!!!!! yeah baby didn't even have to take it off the trailer,this pic was taken by one of my wifes friends after the crowd died down.