Coffin car build

2 minute(s) of a 43 minute read

romp romp romp and it started flames coming out of the zoomies, kool then omg look at all the oil coming from back of the engine. dam i bet the rear seal moved, no man its coming from behind the manifold oh crap the oil line is open phew no bigger but ITS ALIVE!!!!, ITS ALIVE!!!!! and we need to put a another shim in the starter

3-19-2012

ok little bit of an up date. taped off what i could ( steering wheel, gas and break pedal) ,took off the floor board. put on 3 coats of primer then 3 coats of HOK black then 3 coats of HOK clear.. got a little bit of solvent pop but not all that bad i mean you have to be at least 12' away to really see it . so im just gonna wet sand where its not covered anything under the body im not worried about probably sand only where the motor is back to the box. took a piece of diamond plate 24x10 and made a place for the gas tank to be laid to rest. the radiator is alium. model T type so i can just polish that

3-23-2012

ok started adding the trim maybe a little overkill but its better then a box with just the handles I wanted MTV to pimp my ride but never got any email answers...... anyway its coming along pretty good i think a lot of sanding to get everything flat and level as possible show season starts next month but im still thinking my first show will be in May