1SC Stripper Build by Heyfred

5 minute(s) of a 115 minute read

1SC Stripper Build

Compliments of Heyfred @ www.ls1tech.com

Finally starting to come together. Approximatly 6 months ago I purchased a low mile 2002 1sc Camaro w/auto. Hopefully we can go out and have some fun racing locally this next summer.

Did alot of reading on the site and so far this is what I bought:

http://www.neweraperformanceparts.co...=NEPSShtCamF|0

Cam 

http://www.neweraperformanceparts.co...A=E&PKV=2013|0

Heads

http://www.neweraperformanceparts.co...&PKV=ytls1rr|0

Rocker arms

http://www.neweraperformanceparts.co...E&PKV=100221|0

Balancer

http://www.neweraperformanceparts.co...lanteTripleF|0

4000 converter

http://www.neweraperformanceparts.co...KV=LS19899-1|0

Headers

http://fuelinjectorconnection.com/sh...&productId=179

Injectors

Exhaust CME (Example shown)

UMI Kmember

AFCO double adjustable on all 4 corners

http://www.mandhtires.com/store.php?...on=show_detail

http://www.mandhtires.com/store.php?...on=show_detail

M/H tires

Wheels 2002 SS rims, fronts narrowed to 6" (weldcraft)

http://www.neweraperformanceparts.co...=E&PKV=70802|0

Subframe Connectors

Kenne Bell Boost-a-Pump

Prothane motor and trans mount

Tranny is in the shop gettiing upgraded.

http://www.ls1tech.com/forums/drag-r...-c-delete.html

A/C delete

Vendors I delt with and have had excellent service with

New Era Performance

Midwest Chassis 

Patriot Performance 

Fuel Injector Connection

2/5/2009

It's going back together. Sent the tranny out, had it upgraded and installed a Vigilante 4000 stall triple disc converter.

2/16/2009

Motor is in. The only issue is the Prothane trans mount.

I will have to modify the stock cross member or fab up a new one. 

I have decided to do the ABS delete. 

Also, this weekend, I picked up a N case 9" center section set with 4.56 gears.

2/16/2009

Stock tranny mount vs Prothane.

Made sure I had the correct mounts, engine, tranny and verified I put the motor mounts together correctly. Checks out.

So, I decided to modify my stock tranny crossmember to accept the Prothane tranny mount which does not fit well.

Here it is tacked and test fit. Goes on and off with ease.

2/18/2009

Installed a SLP balancer which required a shorter belt to be used.

Installed the afco rear coilover shocks, Midwest LCA and panhard bar. Next, saving for 9" from Midwest.

panhard bar

Preparing for ABS delete. Kit should arrive first part of next week.

Things left:

* Install KB boost-a-Pump

* Get PC680 battery

* Get 9"

* Install ABS delete